Precision Gearbox for Stepper, BLDC & DC Motors

PSGB-A

Precision Spur Gearbox (PSGB-A): Built for Stepper, BLDC & DC Motors

A precision spur gearbox reduces motor speed and increases torque while keeping output motion accurate and repeatable. Auto-Mach Technologies manufactures the PSGB-A precision spur gearbox in Pune, India, using metal, plastic, and sintered spur gears paired with hardened steel output shafts. It works as a stepper motor gearbox, a gearbox for BLDC motor, and a gearbox for DC motor across instrumentation, medical, and industrial automation equipment.

If your application needs stable speed reduction in a compact housing, the PSGB-A is built for exactly that. Get a quote for your PSGB-A precision spur gearbox and our engineering team will confirm ratio, shaft, and mounting options for your motor.

ENQUIRE NOW

High-Performance Gearbox for Stepper Motor, BLDC Motor & DC Motor

What Is the PSGB-A Precision Spur Gearbox?

The PSGB-A is a compact precision spur gearbox designed for motion control applications where accuracy and long service life matter more than raw torque. We build it with a mix of metal, plastic, and sintered spur gears, plus hardened steel output shafts for durability under repeated cycles.
The housing uses a plastic dust cover with a metal mounting plate, so the gearbox stays lightweight without sacrificing strength. This construction keeps the unit compact enough for space-limited designs while still handling continuous industrial duty.
We manufacture the PSGB-A precision spur gearbox to work with three motor types: stepper motors, BLDC motors, and DC motors. Each pairing needs a slightly different approach to gear ratio and shaft design, which we cover below.

How Does the PSGB-A Work as a Gearbox for Stepper Motor Applications?

A gearbox for stepper motor use has one main job: keep step positioning accurate while adding torque at low speeds. The PSGB-A does this by reducing speed through its spur gear train without introducing backlash that would throw off positioning accuracy.

what it brings to stepper motor systems:

Improves torque output at low rotational speeds
Holds accurate step positioning across repeated cycles
Cuts vibration and noise compared to direct-drive setups
Runs reliably under both continuous and intermittent duty

How Does the PSGB-A Perform as a Gearbox for BLDC Motor Applications?

BLDC motors run at higher speeds than stepper motors and need a gearbox that stays quiet and stable under continuous load. As a gearbox for BLDC motor use, the PSGB-A supports a wide gear ratio range so you can tune output speed to your application.

Key strengths for BLDC pairing:

Handles both axial and lateral loads without extra bracing
Fits into space-limited product designs
Delivers smooth torque transmission during continuous operation
Keeps noise low even at higher input speeds

How Does the PSGB-A Function as a Gearbox for DC Motor Applications?

DC motors are simple and common, but most need extra torque and controlled speed to be useful in real equipment. The PSGB-A works as a gearbox for DC motor applications by stepping down speed and multiplying torque through its spur gear stages.

What OEMs get from this DC motor gearbox pairing:

Stable performance under sustained load
Hardened steel shafts that hold up over long operating hours
A lightweight housing that drops into existing product designs
Consistent output speed across the gearbox's rated life

Dimensional Drawing

Technical Data

Specification	Units	Technical Details
Gear Ratio	RPM	10 : 1 up to 50000 : 1 (As per the requirements)
Torque Capacity	Ncm or Nm	100 Ncm (approx. 1.0 Nm) (Depending on gear trains ratios)
Dimensions	mm	55 × 66 × 16
Output Shaft	mm	Ø 4 mm × 10 length (Possible to modify as per requirements)
Weight	gm	60 ~ 90
Compatible Motors	—	Synchronous motors, BLDC motors, PM stepper motors, DC geared motors
Mounting	—	Standard flange mounting
Gear Type	—	Metal and plastic spur gears as per requirements
Housing	—	Plastic body with metal plate
Out-Put Shafts	—	Hardened steel shafts included
Axial Thrust	N	20
Lateral Force	N	60
Operating Temperature Range	°C	-15 to +60
Protection Rating	IP	40 enclosure

Where Is the PSGB-A Precision Spur Gearbox Used?

We supply this gearbox to buyers running precision motion equipment across several sectors:

Instrumentation

precise motion and control for measurement and testing equipment

Diamond Machinery

accurate, durable drive mechanisms for cutting and polishing equipment

Peristaltic Pumps

steady drive for continuous fluid transfer in lab, industrial, and medical settings

Motorized Displays

smooth automated movement for kiosks and presentation systems

Programming Devices

accurate sequencing and timing for automation equipment

Medical Equipment

compact, dependable drive systems for diagnostic and therapeutic devices

Valves and Actuators

precise control in fluid handling, HVAC, and process applications

Designed for Precision Motion Control

How Do You Choose the Right Gearbox for Your Motor?

Matching a gearbox to your motor comes down to a few practical questions:

What motor type are you running? Stepper, BLDC, and DC motors each need different ratio and shaft setups.
How much torque do you need at the output shaft? Higher torque needs usually mean a higher reduction ratio.
How much space do you have? The PSGB-A's compact housing fits tight product designs without losing durability.
What's your duty cycle? Continuous-duty applications need a gearbox rated for sustained load, like the PSGB-A.
Do you need a custom mount? We machine motor-specific mounting on request, so the gearbox drops straight into your assembly.

Why Buy the PSGB-A from Auto-Mach Technologies?

Auto-Mach Technologies has manufactured gears, motors, and gearboxes in India for more than 30 years. We hold ISO 9001:2015 and ISO 14001 certification, and we currently supply 300+ clients across 12 countries.

Automach Gear stands out among helical gear manufacturers in Pune due to:

In-house gear cutting and assembly

Batch-level inspection

Full customization on gear ratio, output shaft

Strong engineering support for OEMs

Reliable supply for OEMs and EPCs

Get a Quote for PSGB-A Gearbox

Looking for a stepper motor gearbox, gearbox for BLDC motor, or gearbox for DC motor?

Talk to our experts

FAQs

Frequently Asked Questions

A stepper motor gearbox is an integrated system where a gearbox is attached to a stepper motor to reduce speed and increase torque. It allows precise control of movement, making it suitable for applications that require accuracy and stability.

A gearbox for stepper motor is used to enhance torque output and improve motion control. It helps the motor handle heavier loads, reduces vibration, and ensures smoother and more accurate positioning.

Yes, a gearbox for a BLDC motor is commonly used when applications require controlled speed and higher torque. It is especially useful in automation, robotics, and electric mobility systems.

A gearbox for DC motor is widely used to adjust speed and increase torque. It enables DC motors to perform efficiently in applications like conveyor systems, lifting mechanisms, and industrial equipment.

A gearbox reduces the motor’s speed while increasing its torque output. This helps in achieving better control, especially in applications where slow movement and high force are required.

Using a stepper motor gearbox offers several advantages:

Increased torque for heavy-duty tasks
Improved positioning accuracy
Smoother and more stable operation
Better control under varying loads

Planetary gearboxes are often preferred because they provide compact design, high efficiency, and low backlash, making them ideal for precision-driven applications.

When choosing a gearbox for stepper motor or BLDC motor, consider:

Required torque and output speed
Gear ratio
Precision and backlash requirements
Nature of the application

Stepper motor gearbox solutions are commonly found in:

CNC and automated machinery
Packaging and labeling equipment
Robotics systems
Medical and precision devices

No, a gearbox is not always necessary. It is mainly used when the application demands higher torque, reduced speed, or enhanced precision beyond the motor’s standard capability.